We found that all the non-working switches were caused by 1 loose wire in the connector plug. Now the ramp is no longer clicking, the yellow and green targets work, but the left outlane is still not responding.
We also found that the rubber band near the ramp was not in the right position: it had slipped off. This caused the 10 point switch error. It was easily fixed.
Need to delete the high scores. In the testing process (with glass plate removed, trying out all switches) Dad managed to get the 1st place, over 5.2 million.
Abonneren op:
Reacties posten (Atom)
1 opmerking:
Do not remove the high scores.
I do the most repairing jobs, but I am a worse pinballer. (I always can do the trick again |-)
The other pin ball you have seen was a very bad mechanical one. If you look at the Back board you will notice that every counter is removed and also the glass plate with decoration is missing. For mechanical pinballs you hardly find spares. I think this one was used as a donor machine.
Een reactie posten